Fargo 82266 Ultracard CR80 adhesive backed PVC cards are a thinner adhesive backed version of the common CR80 card size. The Fargo 82266 cards are 10mil thick and feature an 10 mil thick adhesive paper backing. Before the backing is removed they are 20 mil thick. The most common use for CR80 adhesive backed cards is for printing with a direct-to-card printer and then adhering the card to a clamshell or other proximity/technology card.

Note: This product is not compatible with Magicard printers. Magicard printers require the use of M3610-054B adhesive backed cards.

Remember: If you’re placing these cards on pre-slotted access control cards, you will need a slot punch to render a matching hole in the adhesive-backed PVC card. Slot punching should be done AFTER printing to avoid damage to your printhead. See our Slot Punches section for options.

Note:Fargo 82266 cards may be too thin to feed into some card printers. Please check your card printers specifications. If you are unsure if your card printer is capable of printing on CR80 cards, call us at (866) 433-9737.