Fargo 81759 Ultracard CR79 adhesive backed PVC cards are slightly smaller then the common CR80 card size at 3.303” x 2.051. The Fargo 81759 are 10mil thick and feature an adhesive back and paper backing over the adhesive. Before the backing is removed they are 20 mil thick. The most common use for CR79 adhesive backed cards is for printing with a direct-to-card printer and then adhering the card to a clamshell or other proximity/technology card. The smaller size is designed to fit just inside of the edge or CR80 proximity cards.
Note: This product is not compatible with Magicard printers. Magicard printers require the use of M3610-054B adhesive backed cards.
Remember: If you’re placing these cards on pre-slotted access control cards, you will need a slot punch to render a matching hole in the adhesive-backed PVC card. Slot punching should be done AFTER printing to avoid damage to your printhead. See our Slot Punches section for options.
Note:CR79 mil cards may be too small to feed into some card printers. Please check your card printers specifications. If you are unsure if your card printer is capable of printing on CR79 cards, call us at (866) 433-9737.
Reviews
There are no reviews yet.